Availability: | |
---|---|
Quantity: | |
VOCs waste gas treatment technology
Baimaoyuan
Product Information:
VOCS waste gas treatment gives priority to recycling the recyclable components in the waste gas to realize resource utilization, and finally treats the non-recyclable parts. The recycling methods include condensation recovery and resin adsorption. When treating low-concentration and high-volume waste gas, activated carbon adsorption or rotary adsorption can be used to concentrate the waste gas, increase the concentration of organic matter, reduce the amount of waste gas treatment, and greatly reduce the operating cost of waste gas treatment.
The waste gas treatment methods include regenerative thermal incinerator (RTO), catalytic incinerator (RCO), and direct combustion furnace (TO). The optimal treatment method is selected for different waste gases to achieve energy saving and efficiency improvement. Activated carbon adsorption is used as a temporary treatment facility as a standby, and as a temporary treatment facility when the incineration system is repaired.
Product Features:
1. VOCS waste gas treatment gives priority to resource utilization, using condensation recovery, resin adsorption and other methods to first recover the recyclable components in the waste gas, and then finally treat the non-recyclable parts;
2. Choose reasonable treatment methods for different waste gases, reduce investment costs and operating costs, and ensure that the treatment meets the emission standards;
3. The system design is centered on safe operation. According to the hazardous characteristics and physical and chemical characteristics of different waste gases, different safety accessories are selected to ensure the safety of waste gas transportation and incineration processes;
4. The heat generated by incineration is given priority to heat storage and heat exchange The system can recycle and reuse the waste heat in the system through methods such as heat transfer oil waste heat boiler or steam waste heat boiler to maximize the use of waste heat;
5. The system has a high degree of automation, and is fully automated from start-up to shutdown, without manual intervention, safe and reliable;
6. Through pre-treatment by dilution, concentration and other methods, both high and low concentration waste gas can be treated;
7. Combined with appropriate pre-treatment such as alkali washing, water washing, and dust removal, it can treat acid-containing waste gas, condensable component-containing waste gas, and dust-containing waste gas, and can adapt to waste gas from various industries.
content is empty!